Submersible Sewage Pumps

 


HITEC Pump Industries have designed these Sewage pumps to handle large quantities of Solids thereby accomplishing dewatering as well as desilting ! The Pump is to prevent Frequent clogging of the sewer system due to sedimentation of mud, Sludge, Rags, Plastics, Cotton waste et; Maximum depth is 10 mtr. Liquid temperature is 40 C.

POWER SUPPLY : 415 6%, 3 Phase, 50 Hz 3% AC supply. It is also available in other combination.
MOTOR : Squirrel cage induction motor of continuous rating having 'F' Class insulation with Bi-metallic. switches embedded in stator winding to protect against over heating.
BALL BEARING : Double row angular contact bearing at lower side to carry high trust and radial loads, Deep Groove single row ball bearing on upper side. These Bearings are filled with special grease to withstand high temperature.
POWER CABLE : Water Proof / Oil Proof PVC / EPR insulated double sheathed copper conductor flexible cable of appropriate size in 15 mtr. length.
MECHANICAL SEAL : Double seals in tandem arrangement immersed in oil to ensure long life maintenance free operation.

Application :
Pumping of raw unscreened Sewage, Storm Water, Hotel, Lift irrigation, Paper Mills, ETP, Drainage System etc.
 

   
 
 
MATERIALS OF CONSTRUCTION

PART

MATERIAL

SPECIFICATION

Casing

C.I.

IS210 - Grade FG 200

Impeller

S.S.

AISI 410

Shaft

S. Steel

AISI 4131

Mech. Seal

TC Vs TC

----------

 
 
 
Model Insullation Class HP / kW Voltage Phase Hz Speed Amps Cable Outlet in mm Solid Size in mm Weight in Kg
HSW01T/S F 1 / 0.75 415 / 230 3 / 1 50 2750 2.5 / 6.5 4 x 1.5 = 10 mtrs 50 20 22
HSW02 F 2 / 1.5 415 3 50 2800 3.4 4 x 1.5 = 10 mtrs 50 25 45
HSW03H F 3 / 2.2 415 3 50 2800 5.4 4 x 1.5 = 10 mtrs 75 40 55
HSW03M F 3 / 2.2 415 3 50 1410 5.4 4 x 1.5 = 10 mtrs 75 50 65
HSW05 F 5 / 3.7 415 3 50 1420 8.0 4 x 2.5 = 10 mtrs 100 60 90
HSW07 F 7 / 5.5 415 3 50 1420 11.0 4 x 2.5 = 10 mtrs 100 60 105
HSW10 F 10 / 7.5 415 3 50 1440 15.0 4 x 4 = 10 mtrs 100 75 125
HSW15 F 15 / 11 415 3 50 1450 22.00 4 x 4 = 10 mtrs 150 75 160
HSW25 F 25 / 18.6 415 3 50 1460 36.00 4 x 6 = 10 mtrs 150 75 205
HSW35 F 35 / 26.11 415 3 50 1460 48.00 4 x 10 = 10 mtrs 150 100 285
HSW50 F 50 / 37 415 3 50 1460 68.00 2 x 4 x 10 = 10 mtrs 150 100 365
HSW75 F 75 / 55 415 3 50 1460 90.00 2 x 4 x 16 = 10 mtrs 200 100 480
HSW100 F 100 / 75 415 3 50 1460 135.00 2 x 4 x 25 = 10 mtrs 200 100 640
 
 
 
HEAD IN MTR.
  4 8 12 16 20 24 28 32 36 40 44 48 52 56 60
HSW01 T/S 190 110 30 - - - - - - - - - - - -
HSW02 410 280 150 - - - - - - - - - - - -
HSW03M 1600 850 350 - - - - - - - - - - - -
HSW03H 900 750 550 350 150 - - - - - - - - - -
HSW05 2050 1450 700 200   - - - - - - - - - -
HSW07 2580 1960 1280 500 100 - - - - - - - - - -
HSW10 2800 2150 1500 900 400 -- - - - - - - - - -
HSW15 3650 2800 2450 1600 850 250 - - - - - - - - -
HSW25 5100 4400 3850 2900 1900 900 300 - - - - - - - -
HSW35 6200 5600 5100 4550 3200 2400 1600 920 - - - - - - -
HSW50 7400 6500 6080 5200 4300 3400 2900 1400 - - - - - - -
HSW75 9400 8600 7800 6700 5600 4900 3400 2600 -- - - - - - -
HSW100 12500 10800 9400 8200 7200 6400 5300 3900 1400 - - - - - -

 
      Copyright 2009 Hitec Pump Industries All Rights Reserved